

SpaChlorinator™ 2005-2010
TechniChlor
Spa / Hot Tub Salt Water Chlorine Generator
TechniChlor is simple, economical and easy to use and setup for managing your water conditions. It will adapt to changes in your hot tub automatically including water temperature and hot tub usage. When you are using your spa more often, it will make more chlorine keeping your spa clean and clear!
TechniChlor offers simple lights providing a means to set the power level, alert the user when it is time to add salt, and perform diagnostic functions.
The standard installation option is 110 VAC and requires a water protected cover for the power supply within 5 feet of the spa. The 110 VAC outlet must be GFI or GFCI protected.
Includes



The outside installation option supports both 110/220 VAC and includes a NEMA 6P water-tight enclosure. The 110 VAC outlet must be GFI or GFCI protected. The OI option also includes an On/Off switch.
Includes
Both the SI and OI models have a 10 foot cable from the TechniChlor to the power supply. This option can be used if the power source is more than 5 feet from the spa. Note: When purchasing the TechniChlor SI, the 10 foot extension must be purchased at the at the same time if needed.
