Pool & Spa Chlorine Generators
Friday, April 16th, 2010Chlorine generators make chlorine from salt in your pool or spas water. You simple add salt to the water and the chlorine generator does the rest. The typical salt concentration is 2000 to 4000 ppm, at 3000 ppm that is about 2 pounds of salt per 100 gallons of water. Chlorine generators are very popular because they eliminate the buying, storing, transporting and handling of chlorine as well as provide a dramatic reduction in the maintenance demands of your pool or spa.
Self Cleaning
The chlorine generator has titanium plates with a special rare-earth coating that can have a build-up of calcium or other compounds over time. That is because during the electrolysis process current goes in one direction from plate to plate. Chlorine generators with the feature of self cleaning periodically reverse the direction of the current which helps to break up the compounds that have attached to the plates. If the hardness of the water is very high even self cleaning chlorine generators may still need to be cleaned, but not as often as those without self cleaning.
Adjustable Power
Chlorine generators typically operate at full power. To adjust the power they adjust how long they are on. A chlorine generator operating at half power may be on for 12 hours in a day, and off for 12. Chlorine generators without adjustable power usually need a timer added so you can externally control the amount of chlorine produced. Without controlling the chlorine production you can end up with too much chlorine. You can also adjust the chlorine production by increasing/decreasing the salt level but this can be a hassle.

![Reblog this post [with Zemanta]](http://img.zemanta.com/reblog_c.png?x-id=90167b02-22f9-4bf0-b0ce-d2f40f8e4875)